NetXolNetXol
Solutions

Every solution an FTTH ISP needs — on one platform

ACS, auto-provisioning, multi-vendor NMS, GPON management, RADIUS / AAA, subscriber billing, AI network operations, capacity planning, root-cause analysis — wherever your search started, NetXol delivers it end-to-end on a single data plane.

Book a demoUpload your RFP
ACS · TR-069 / TR-369

ACS for ISPs — TR-069 and TR-369 (USP) on one platform

The auto-configuration server your network actually needs in 2026.

NetXol ships a production-grade Auto Configuration Server that speaks both TR-069 (CWMP) and TR-369 (USP) over a single TR-181 data model. Zero-touch first-time configuration, staged firmware rollouts with health gates, idempotent RPC pushes, role-based access for AI controllers, and a documented inform budget for regional flap events.

  • TR-069 and TR-369 (USP) in one ACS, no rip-and-replace
  • Zero-touch first-inform configuration with quarantine policy
  • Multi-vendor parameter normalisation across firmware versions
  • Staged firmware campaigns with rollback on health breach
  • Idempotent pushes — re-applying a profile is a no-op
See NMM
Auto-Provisioning

Zero-touch auto-provisioning — from order to live in 8 minutes

New-subscriber activation, end-to-end, with the engineer free for higher-value work.

NetXol turns a single CRM order into a fully orchestrated workflow across OLT, ACS and RADIUS. ONU whitelisting, VLAN and QoS profile push, WiFi configuration, synthetic speed test, customer notification — all unattended. Exceptions go to a single, well-defined queue.

  • OLT-side ONU auto-authorisation with idempotent whitelisting
  • ACS-side first-inform profile push (WiFi, WAN, QoS, firmware)
  • Synthetic test against the contracted package
  • Exception escalation with full diagnostic evidence
  • 92–97% activations are fully unattended; the rest are clean exceptions
Read the deep dive
Network Monitoring

Multi-vendor NMS — SNMP, NetFlow, sFlow, IPDR, syslog, proxy

A single pane across every device — without losing real-time signal in alarm noise.

NetXol NMM is a unified monitoring platform across the access, aggregation and core. SNMP v1/v2c/v3 polling on every supported vendor, NetFlow / sFlow / IPFIX collection, per-subscriber IPDR analytics, centralised syslog with regex alerting, a content-filtering web proxy and an LLDP/CDP-derived topology graph.

  • SNMP monitoring with vendor-specific MIBs across Huawei, ZTE, CDATA, V-SOL, BDCOM, MikroTik, Cisco, Juniper
  • NetFlow v5/v9, sFlow, IPFIX collection with per-port and per-subscriber drill-down
  • LLDP / CDP topology discovery, real-time graph, manual link augmentation
  • Topology-aware alarm grouping — visible alarm volume drops 80–90%
  • Per-subscriber IPDR usage records for compliance and billing
See NMM
GPON Management

GPON OLT and ONU management at scale

Provision, monitor and assure GPON networks across every major OLT family.

Native adapters for Huawei MA5800 / MA5683T, ZTE C300 / C320, CDATA, V-SOL, BDCOM, FiberHome and Nokia ISAM. Vendor-agnostic service profiles compile down to the right CLI for each vendor — design once, push everywhere.

  • OLT discovery, configuration sync, running-config backup
  • ONU authorisation, profile push, reboot, isolate, optical diagnostics
  • Vendor-neutral service profiles (one profile → many CLIs)
  • Optical power, distance and DDM telemetry per ONU
  • Bulk operations with blast-radius limits
See supported vendors
RADIUS · AAA

RADIUS / AAA server for FTTH and PPPoE / IPoE networks

Authentication, authorisation and accounting designed for ISP scale and ISP workflows.

Coming with NetXol CRM in 2026: a hardened RADIUS implementation with subscriber-aware policy. PPPoE and IPoE sessions, COA (Change of Authorisation), DM (Disconnect Message), session accounting feeding the billing system, and high-availability deployment for active-active fail-over.

  • PPPoE and IPoE session AAA with CoA / DM
  • Subscriber policy from CRM (plan, status, usage cap)
  • Active-active HA with session replication
  • Accounting feed into NetXol billing — no integration glue
  • Throughput targets for 200k+ concurrent sessions
See CRM (Coming 2026)
Billing

ISP billing — recurring, usage-based, prepaid and postpaid

Bills that match the network reality — not the reality your billing system invented.

Coming with NetXol CRM in 2026: subscriber billing that lives on the same data plane as the network. Plans, taxes, recurring invoices, pro-ration, usage-based add-ons, prepaid wallets, retries, dunning, and clean tie-back to RADIUS accounting — so the customer's bill matches their actual session and bandwidth use.

  • Recurring billing with prorated changes mid-cycle
  • Usage-based add-ons fed from RADIUS accounting and IPDR
  • Prepaid wallets with auto-renew and grace policies
  • Multi-currency, tax-rule engine for cross-jurisdiction operators
  • Dunning and retry with subscriber communication built-in
See CRM (Coming 2026)
AI · Closed-loop

AI network operations — Sense, Reason, Act, Verify

Not a chatbot. A closed-loop AI that operates your network 24/7.

NetXol AI is 16 specialist modules running on a unified data plane: AI Network Engineer (voice/chat config), AI NOC, AI RCA, AI Auto-Fix, AI Capacity Planner, AI Predictive Maintenance, AI Voice NOC, AI Executive Assistant. Every action is policy-gated, audited and verified.

  • Natural-language network operations ("create VLAN 500 on OLT-01")
  • Autonomous root-cause analysis with calibrated confidence scores
  • Policy-bounded auto-fix with blast-radius and rollback
  • Predictive maintenance for SFPs, PSUs, fans, ONUs
  • Daily executive auto-reports — no analyst required
See AI & Automation
Root-cause Analysis

Automated root-cause analysis across the GPON tree

Five-second backtrace from any alert to a calibrated conclusion.

NetXol RCA fuses telemetry, topology, history and configuration changes into a hypothesis graph, ranks the candidates by Bayesian probability, and either acts (when confidence and blast radius allow) or escalates to the right role with the full evidence trail attached.

  • Multi-modal evidence fusion (optical, OLT, neighbours, auth, history)
  • Calibrated confidence — 92% confident means actually 92% correct
  • Topology-aware suppression of correlated alarms
  • Acts when safe; escalates when not
  • Cuts MTTR by 40–60% and avoidable truck rolls by 30–50%
Read the RCA deep dive
Capacity Planning

AI capacity planning — see saturation 60–90 days out

Procurement decisions you can make before the customer feels the squeeze.

NetXol's capacity planner forecasts saturation per uplink, PON port and backbone segment, accounting for both historical growth and planned activations from the CRM. Outputs are dated procurement triggers, not just charts.

  • Seasonal-decomposition forecasts on 1-min counters
  • Cohort-aware (CRM planned activations affect the curve)
  • Dated saturation alerts at 80%, 90%, 95% thresholds
  • Procurement-friendly weekly digest to engineering + finance
  • Forecast accuracy ±9% with CRM signal vs ±35% without
Read the capacity guide
Multi-vendor

Multi-vendor management — one operating model across all kit

Stop running four NMSes and four operating cultures. Run one.

NetXol is vendor-agnostic by design. Whether your network is single-vendor or accumulated through M&A, you operate it through one platform, one set of policies and one runbook.

  • Native adapters for 10+ OLT and switching vendors
  • Vendor-neutral service profiles
  • Migration tooling for subscriber, billing and asset reconciliation
  • Decommissioning of legacy NMSes within 9–12 months
  • New-vendor onboarding measured in days, not months
See supported vendors
🇵🇰 Pakistan ISP Software

Built for Pakistani ISPs, deployed globally

NetXol's engineering team is based in Lahore — we live and breathe the operating reality of FTTH ISPs across Pakistan. Whether you're a regional fiber operator in Lahore, Karachi or Islamabad, or scaling subscribers across Punjab, Sindh and KPK, NetXol is the local ISP solution with global engineering.

A practical alternative to PTCL-class OSS BSS stacks

If you're benchmarking against the OSS BSS that PTCL, Nayatel or StormFiber use, NetXol delivers the same operational outcomes — multi-vendor NMS, ISP CRM, RADIUS, Broadband Billing Pakistan operators recognise — without the legacy licence cost or 18-month deployment cycle.

GPON, EPON and PON network management — locally supported

Whether your fiber network runs GPON or EPON, Huawei, ZTE, CDATA, V-SOL or BDCOM OLTs, NetXol's PON Network Management works out of the box. Engineers in Lahore are on call for onboarding, training and incident support — no waiting for a vendor timezone to wake up.

ISP CRM, ISP ERP & Broadband Billing tailored for Pakistan

PKR-denominated billing, multi-currency for cross-border operators, IPDR for PTA compliance, integration with local payment rails (1Link, EasyPaisa, JazzCash), and Urdu-language helpdesk workflows — built into NetXol CRM and ERP from day one.

On-the-ground engineering in Lahore

Our engineering team operates from Walton Road, Lahore — we visit your NOC, sit with your operators, and onboard your network in person where it matters. Lahore-based, Riyadh-headquartered, Madrid-serviced.

Pakistan ISP SoftwareBroadband Billing PakistanISP CRM PakistanISP ERP PakistanLahore ISP SoftwareKarachi ISP SoftwareIslamabad ISP SoftwarePON Network ManagementGPON MonitoringEPON MonitoringFiber Network PakistanLocal ISP Solution
Frequently asked

Common questions about NetXol solutions

The questions we get asked most often when ISPs are evaluating an ACS, NMS, AAA, billing or AI platform — answered honestly.

What is an ACS, and does NetXol provide one?+

An ACS (Auto Configuration Server) is the server that manages CPE devices remotely via the TR-069 (CWMP) protocol — and more recently, TR-369 (USP). NetXol ships a production-grade ACS that supports both protocols over one TR-181 data model, with zero-touch first-inform configuration, idempotent RPC pushes, staged firmware rollouts and policy-gated AI controller access.

Do you support multi-vendor OLT environments like Huawei + ZTE + CDATA?+

Yes. NetXol is vendor-agnostic by design. We have native adapters for Huawei (MA5800, MA5683T), ZTE (C300, C320), CDATA, V-SOL, BDCOM, HSGQ, FiberHome and Nokia ISAM — plus routers and switches from MikroTik, Cisco and Juniper. Generic SNMP v1/v2c/v3 covers any other device.

Can NetXol replace our existing RADIUS server and billing system?+

NetXol CRM (Coming 2026) provides RADIUS / AAA and subscriber billing on the same data plane as the rest of the platform. PPPoE and IPoE session management, CoA / DM support, plan-aware policy, accounting that feeds billing — designed for ISP scale and ISP workflows. You can migrate from FreeRADIUS or commercial AAA without a data freeze.

How long does it take to deploy NetXol?+

For a typical FTTH operator running existing OLT estate, a guided deployment runs about 10–14 weeks end-to-end. Quick-win modules (NMM monitoring, ACS) often go live in the first 4–6 weeks, with deeper migrations (CRM / ERP / billing) following. We run a 90-day playbook that we describe in detail on the blog.

Is NetXol available as on-premises software, or only SaaS?+

Both. NetXol runs as fully managed SaaS or as fully on-premises in your own data centre — including air-gapped deployments for regulated environments. Same features, your choice of control. Most customers start SaaS for speed, then move to hybrid or on-premises as scale grows.

How does NetXol's AI differ from "AI features" added to traditional NMS?+

A chatbot answers a human's question. NetXol AI owns a closed loop — observation → reasoning → action → verification — and closes it without a human. The AI is gated by policy, audited, and explainable. It can take real configuration actions against live devices, not just suggest them, within blast-radius limits.

Can NetXol manage our GPON network without us ripping out our existing OLTs?+

Yes. NetXol works with your installed OLT estate as-is. We onboard your existing OLTs through native vendor adapters, validate the topology against ground truth, and start delivering value the same week. No forklift upgrade required.

What protocols does NetXol speak?+

SNMP v1/v2c/v3, SSH/CLI for vendor-specific operations, TR-069 (CWMP) and TR-369 (USP) for CPE management, NetFlow v5/v9, sFlow, IPFIX for flow analytics, LLDP / CDP for topology, RADIUS for AAA, and standard TM Forum Open APIs for upstream integration.

How does NetXol pricing work?+

NetXol uses a savings-share model — no per-seat tax, no inflated licences. We take a small share of the operational savings we create, so our incentives are aligned with yours. Contact us for a tailored quote against your scale and stack.

Put your ISP on autopilot

See NetXol on your own network in a live demo — or send us your RFP and let our team scope the whole project for you.

Book a demo Upload your RFP